PROGRAMME DES FOURNISSEURS D’ÉDUCATION (PFÉ)

The role of a fire-rated door is to maintain the integrity of a fire-rated enclosure in the event of a fire, giving building occupants enough time to exit the burning building. This course is an introduction to fire-rated doors and a general review of the fire codes that relate to fire doors and hardware, referencing 2012, 2015, and 2018 IBC; NFPA (National Fire Protection Association) regulations; and the ADAAG (Americans with Disabilities Act Accessibility Guidelines).

ON-GOING  1 HR

Outdoor living space has become an important residential design consideration in the last several years. Decks create welcoming spaces to relax and entertain with family and friends, and a well-built deck can add more living space and value to a home. This course discusses deck surfaces, maintenance, and costs and explores porcelain tile as an alternative to wood and composite deck surfaces that is well suited to exterior environments. Also discussed is how porcelain tile can be used with a new pultruded fiberglass and composite underlayment, called structural ribbed self-supporting boards, and the sustainable features of this technology.

New building materials don’t come around very often, and in some cases, an early high-profile stumble can shape perceptions of an otherwise valuable technology. Learning from those mistakes, however, is a fundamental element of driving technical innovation, and real, robust solutions to known issues can ultimately produce the highest level of performance. Magnesium oxide-based composite panels have been used as exterior wall sheathing for several decades due to a number of highly desirable properties, including resistance to fire, dimensional stability, high strength, and other attributes. Early iterations of boards were found to have issues related to moisture and chemical stability, leading to premature failure of the building façade but also teaching the industry specific factors that needed to be improved in future generations of board. Now, as a maturing product category, the enabling technology of how to make consistent, high-quality boards is well known, even if not universally practiced. In this presentation, we review the basics of MgO chemistry, how boards incorporating MgO cement have evolved over time to address early issues in board performance, and how this technology can be incorporated into building exterior wall systems with many favorable attributes.

This course explains the NFPA 285 test method, its origin, its procedures, when it is required, and design considerations necessary for compliance. Criteria in ASHRAE 90.1 for continuous insulation and air/water-resistive barriers are reviewed and identified as contributors to the rise of NFPA 285 requirements. The course also addresses code compliance in light of recent material changes, code changes, and additional testing.

DISTANCE LEARNING

When designing noise control measures for a building, it is critical to look beyond the sound transmission class (STC) and impact insulation class (IIC) ratings in order to create an ideal environment that promotes occupant well-being, protects their hearing, and fulfills the project’s needs. This course provides an overview of noise control principles, construction composites, and design methodologies that reduce noise, with an emphasis on performance-oriented designs requiring third-party acoustical consultants. 

The demand for noise control is increasing due to a growing population, greater expectations of sound privacy, and an increasing awareness of the harmful effects of noise pollution. Noise control is a key component of design because it affects occupant privacy and well-being. This course reviews the design of floor-ceiling assemblies to improve acoustics and occupant wellness.

This course explores how airborne and structureborne noise affects building acoustics and impacts occupant focus, learning, healing, and overall well-being across offices, educational facilities, healthcare environments, and fitness spaces. Participants gain a foundational understanding of sound behavior, testing methods, and common misconceptions and learn how mass, resiliency, and decoupling are integrated into construction assemblies to achieve effective noise control and acoustic performance, in alignment with the LEED® v5 Building Design and Construction and Interior Design and Construction rating systems and the WELL Building Standard™ v2.

Within building spaces, noise can be reduced by using materials or assemblies that isolate sound or mitigate its transmission. To do this, it is important to understand how sound moves through building materials and partitions and the impact of sound mitigation products. In this course, we look at the basics of sound as well as techniques and products to prevent sound transmission.

Concrete masonry units (CMUs) are made from dry-cast concrete, which uses less cement and sequesters carbon at a faster and greater rate than wet-cast concrete. This course begins with an overview of concrete products and the differences between dry- and wet-cast concrete, then explores the relationship between concrete and the carbon cycle, recent research into CMU sequestration rates, and the results of mini life-cycle assessments comparing different wall systems. Finally, some practical strategies for further reducing embodied carbon are reviewed.

With office vacancies rising amid changes in technology and the growth of working from home during the COVID pandemic, the practice of converting office buildings into residential spaces such as apartments, condominiums, and hotels has been embraced by communities and all levels of government as a solution to the housing crisis. This course examines the factors behind these conversions, with emphasis on the use of in-wall toilet systems as a solution to design, economic, and sustainability concerns.

Operable wall systems integrate the indoors and outdoors and define interior spaces, providing flexibility and additional usable area without increasing a building’s footprint. Occupants benefit from expansive daylighting and views as well as quick access to fresh air. This course describes the types of operable wall systems, how they contribute to sustainable design, and the various options and considerations for selecting the correct system.

Building energy code requirements for thermal envelope insulation performance have continued to rise over the years. Selection and proper installation of roofing insulation play a large role in the energy efficiency of commercial buildings. This course reviews types of roofing insulation, their layout and attachment methods, and design considerations to address ponding water and condensation issues. Thermal and fire performance and environmental impacts of rigid roofing insulation types are also compared.

Energy conservation and occupant well-being, comfort, and productivity are issues of increasing concern in building design. This course illustrates how radiant heating and cooling systems address these issues positively and efficiently. It encompasses the various types of systems available and how they can contribute to credit requirements in the LEED® v4.1 Building Design and Construction rating system and the WELL Building Standard™ version 2. System workings, design, aesthetic considerations, advantages, testing and measuring protocols, and installation procedures are reviewed, and the course concludes with several installation examples.

In response to steadily growing demands for more and more storage capacity and the costs and energy required to implement that storage, data center design is now focusing on solutions that conserve energy, materials, money, and space. This course explores the current influences that directly or indirectly affect energy usage and management, the resulting trends in data center development, and how containment strategies enable designers to optimize energy efficiency and create facilities with minimal environmental footprints.

Research indicates that the quality of light directly affects the quality of life in a space; access to daylight and outdoor views promotes happiness and productivity. Reviewed in this course are the features of polycarbonate sheeting systems and how they contribute to energy-efficient daylighting design, as well as the overall health and well-being of the building occupants.