PROGRAMME DES FOURNISSEURS D’ÉDUCATION (PFÉ)

Demand for safety, energy efficiency, and contemporary aesthetics is driving building envelope design that incorporates increased amounts of combustible material in cladding, insulation, and water-resistive barriers. This course outlines the difference between insulated metal panels (IMPs) and aluminum composite material (ACM) panels, discusses reaction to fire and fire resistance, addresses building code and building envelope fire testing, and provides global case studies demonstrating the impact of IMPs on the building envelope after exposure to fire.

With limited exceptions, the International Building Code® (IBC®) requires testing and compliance with NFPA 285 for exterior wall assemblies of buildings of Types I, II, III, and IV construction containing foam plastic insulation. This course examines three methods for demonstrating that an exterior wall assembly design complies with NFPA 285, including engineering analysis. The course also discusses how and where to locate NFPA 285 information for each compliance method.

ONGOING - FREE - 1 HOUR

Manufacturers, industry groups, architects, designers, and homeowners all share an expectation of safety in the buildings we occupy and use every day. This course discusses the key chapters where important exterior wall fire provisions can be found in the International Building Code® and examines many common features of global fire incidents. The course also describes the NFPA 285 fire test and discusses the new Annex B in the 2023 edition of NFPA 285. Finally, there is a discussion of the code compliance pathways when exterior walls are required by the IBC® to be tested and comply with NFPA 285.

One of the most complex and least understood areas where fire can propagate is at the perimeter of a multistory building. Fire can spread not only from floor to floor via the edge-of-slab/curtain wall intersections but also along the exterior building enclosure where untested, combustible components are often installed. This program outlines best design practices for providing fire protection for building occupants per ASTM E2307 and ASTM E2874.

Today’s complex steel structures present numerous design challenges, including the challenge of fireproofing appropriately in order to ensure the safety and well-being of building occupants as well as protection of the structure itself. This course outlines the code and testing standards that inform fireproofing choices and the various passive fire protection products and methodologies that can address a comprehensive range of design challenges; insight into the proper specification of fire protection products as well as their ability to improve LEED® certification levels is also provided.

Firestopping is the process of sealing openings around penetrants or in joints or gaps between fire-rated assemblies to restore hourly fire resistance ratings. It is a critical part of fire containment and a balanced fire and life safety plan. This course outlines resources and code requirements that architects and designers should be aware of while preparing specifications for firestop systems in their projects. The course also reviews common mistakes to avoid.

Firestopping is more than installing sealant in an opening. It is a critical component of a building’s overall life-safety system. This course discusses how a properly installed firestop system not only protects property but, more importantly, also saves lives by inhibiting the spread of fire from compartment to compartment and buying valuable time for occupants to exit the structure in the event of a catastrophic fire. 

With a radiant heat system, the temperature profile associated with a forced-air system is switched around, and the entire floor becomes the radiator. The heat radiates from the floor, warming all of the objects in the room, and everything in the room gains a warm, comfortable feel to it. This course evaluates self-regulating polymer technology and the performance benefits of using PTC (positive temperature coefficient) heaters for energy-efficient floor warming, primary heating, snow melting, and roof deicing.

For many years, preformed metal wall panels have been a top choice for building owners and architects, offering an excellent blend of cost effectiveness, functionality, and aesthetic appeal, particularly in rainscreen and screen walls. This course examines the different materials, profiles, and finish options for these panels and dives into applications and best practices for design and installation.

Some building parts may see minimal human contact or weathering. Doors and entryways, however, need to be able to stand up to heavy use, frequent direct contact from building occupants, and environmental impacts. In this regard, FRP doors and frames offer robust strength, reliability, and durability. They provide project versatility and customization in colors and textures, are excellent thermal insulators, and allow for easier installation and lower costs in construction projects. This course outlines the FRP door and frame components, manufacturing methods, and types and discusses the benefits of FRP products.

Humidity affects numerous industries, potentially leading to building damage and health problems. Mechanical dehumidifiers play a critical role in controlling humidity across different environments, ensuring comfort and safety while preventing any humidity or condensation issues that interfere with daily business. In this course, we provide insight into the principles of psychrometrics, enabling participants to understand the properties of air and water vapor mixtures significant to moisture control. We explore the operation of mechanical (vapor compression) dehumidifiers, their performance parameters and limitations, and installation configurations. Finally, we examine some examples of beneficial applications.

ONGOING - FREE - 1 HOUR

Power and charging requirements for hospitality facilities are changing radically and rapidly. This course examines the options for and benefits of supplying power and charging outlets in walls, furniture, headboards, nightstands, public seating, and public gathering spaces, including outdoor areas, as well as the applicable codes for furniture-based power outlets. The course concludes with an overview of the benefits of occupancy sensors and auto-off switches in guest rooms and the installation requirements to comply with energy and electrical codes. 

This course introduces accessibility from Canadian and US perspectives. It covers a few specific technical accessibility requirements and compares the differences when referencing Canadian or US design standards, such as the National Building Code of Canada (Canada's Model Code) or the Americans with Disabilities Act (ADA) (the United States accessibility regulation), while reinforcing the intent of good design that is not always outlined by a code or standard. The seven principles of universal design are also discussed.

Fireplaces have become standard in living rooms and dens, but gas and electric fireplaces can enhance many other areas of the home. This course reviews studies on the health and wellness benefits of fireplaces; architects and designers will learn how to add value when working with clients by providing them with scientific research that shows including fireplaces in home design has positive impacts on physical and mental health. Heat management methods, fireplace types and configurations, and media and design options are also discussed.

Direct vent fireplaces are safe and efficient supplemental heat sources in today’s homes. This course reviews the innovative design options for gas fireplaces, including media options, cool wall technology, and safety barriers. Direct and power vent heat delivery systems are discussed, and the impact of standing versus electric pilot lights on energy efficiency is examined.